TNM1CXL13
| Model: | TNM1CXL13 – Huawei OSN 550 Main Equipment |
| Detail: | 1xSTM4(S-4.1,LC,Single Fibre Bidirectional,1490 Sending&1310 Receiving)System Control,Cross-connection,Optical Interface Board(20G HO Cross-connect/5G LO Cross-connect) |
Warranty: supplied with the Green Code 1-year standard hardware repair warranty. Any manufacturer warranty terms shown in the specifications below are the manufacturer’s own.
TNM1CXL13 is a Huawei system control and cross-connect board for the OSN 550. It combines two jobs that larger shelves keep separate: running the shelf, meaning configuration, alarms, management access and the timing reference everything locks to, and switching the traffic between the cards.
The cross-connect is the part that sets the ceiling for the whole node. Everything the tributary and line boards carry passes through it, so its capacity, not the slot count, is what decides how much traffic the shelf can actually handle. A node can run out of cross-connect capacity while the slots and the boards appear to have room left, and that is a confusing thing to diagnose if you are not expecting it.
This one provides 20 Gbit/s of higher-order cross-connect and 5 Gbit/s of lower-order. Those two numbers are not interchangeable and the distinction matters. Higher-order switching handles whole VC-4 containers; lower-order switching reaches inside them to switch individual VC-12 or VC-3 circuits, which is what you need to groom E1s rather than just pass whole STM-n payloads through. A shelf with plenty of higher-order capacity and little lower-order will pass big pipes happily and then run out the moment you ask it to switch individual circuits. If your traffic is E1-level, the 5 Gbit/s figure is the one that constrains you.
Check whether this configuration is protected. The cross-connect is a single point of failure for the whole node, so where it is unprotected a failure takes down every circuit in the shelf rather than one card’s worth. That is an acceptable risk in some positions and an unacceptable one in most, and it is a decision better made at order time than after an outage.
It also presents interfaces directly on the board: 1 STM-4 optical port. Integrating them saves slots in a small shelf, which is the point, but it also ties them to the control board: if the board is replaced, those interfaces are disturbed along with the control function, so the cabling has to be planned with that in mind.
The optical interface class is S-4.1, a short haul interface at around 1310 nm with a reach of about 15 km. That class comes from an ITU standard, and the classes are not interchangeable: a short-haul interface will not reach a long-haul distance, and a long-haul transmitter on a short fibre overloads the far-end receiver and produces errors that look exactly like a fault. Match the class at both ends to the fibre you have, and attenuate where the run is short.
This is SDH-generation equipment, and SDH is a legacy transport technology. The industry moved to packet and to OTN years ago, and the OSN 550 is not a platform anyone is designing a new network around in 2026.
That is not the same as saying it is useless. A great deal of SDH is still in service carrying E1 and STM-n circuits that work perfectly well, in utilities, rail, broadcast, defence and government networks where the circuits outlive the fashion in transport technology. If that is what you are maintaining, this keeps it running. If you are being offered SDH for something new, push back.
What to confirm. The subrack this is going into, the software release, and whether you need lower-order switching as well as higher-order. Tell us the shelf, the release and the mix of traffic the node has to groom, and we will confirm this board matches, including whether the capacity covers what you intend to populate rather than only what runs today.
Green Code Technologies supplies Huawei transmission hardware, including line and tributary boards, cross-connect and control cards, optics and the shelves they go in. We are a supplier of Huawei alongside HPE, Dell, Cisco, Samsung and Netgear, and we would rather confirm a part against Huawei’s own documentation than sell you the wrong one, which on OSN 550 equipment is worth doing. Send us the platform, the subrack and the software release and we will come back with a straight answer.
TNM1CXL13 Specification
1xSTM4(S-4.1,LC,Single Fibre Bidirectional,1490 Sending&1310 Receiving)System Control,Cross-connection,Optical Interface Board(20G HO Cross-connect/5G LO Cross-connect)
Q & A
Trusted IT Hardware,
Delivered Right.
Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, worldwide delivery, and expert support.
Enterprise IT Solutions Partner
Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more.
UK & Worldwide Delivery
We deliver across the UK and export worldwide. Lead times vary by product and are confirmed at quotation.
100% Authentic Hardware
Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment.
Expert Technical Support
Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.
Competitive Pricing
We work to bring you the best enterprise IT hardware value without compromising on quality or warranty.
Sustainable IT Solutions
Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.


























Reviews
There are no reviews yet