SLC1SXA3B01

SLC1SXA3B01 is a board for Huawei transmission equipment, for the RTN 310. It plugs into the shelf and does its work between the client interfaces and the shelf’s cross-connect.

What it presents. 1 Gigabit Ethernet port, on RJ45 connectors.

How to read a Huawei board part number, and why nearly right is wrong. These codes are structured rather than arbitrary: a platform prefix, a hardware version, a short functional mnemonic and then a trailing feature code. The shelf’s software matches against that whole string, which is why a part number that differs by one character is not a near-enough substitute. The trailing digits in particular often encode the thing most likely to break interoperability, such as the error-correction scheme or the optical variant, and two boards whose codes differ only there can be the same rate, the same platform and the same generation and still refuse to work as a pair across a span.

If this is a spare, read the label off the card that is in the shelf. On equipment that has been maintained for a few years, the installed hardware and the paperwork have usually diverged: boards get swapped under pressure, revisions change, and the as-built record is rarely updated. The part number on the card in the slot is the authoritative answer and the original order is not. It takes a minute and it avoids the most common failure in spares purchasing, which is buying the board that was specified rather than the board that is actually fitted.

It is also worth deciding what this board is for before you order it. A spare held against a failure, a card for a planned expansion and a replacement for something already faulty are three different purchases with different urgencies and different tolerances for substitution. For a true spare, matching the installed hardware exactly matters most. For an expansion, there may be a newer and better-supported board that does the same job, and we would rather tell you that than sell you the old one.

The RTN 310 is a Huawei microwave platform, and its lifecycle status is genuinely unclear. Huawei’s RTN line as a whole is still an active product family, but the position of this particular model could not be established: Huawei’s lifecycle database sits behind a login and model-level end-of-sale and end-of-support dates are not published openly.

So this page will not tell you the platform is current and will not tell you it is finished, because neither can be checked from outside. If that distinction matters to your purchase, and on microwave it often does because licensed-band links tend to live for a decade, ask us to confirm it with Huawei before you commit.

Three things to confirm before ordering a board. The subrack, because board support depends on the shelf and some Huawei subrack variants have no electrical cross-connect at all, which makes tributary and line boards ordered for them unable to carry traffic. The software release, because support is gated by release as well as by slot. And whether the optics are included, where the board takes pluggable modules, since Huawei equipment generally expects Huawei-coded optics and that is a frequent gap between two otherwise comparable quotes. Tell us the shelf and the release and we will confirm this board is supported in that combination before you commit.

Green Code Technologies supplies Huawei transmission hardware, including line and tributary boards, cross-connect and control cards, optics and the shelves they go in. We are a supplier of Huawei alongside HPE, Dell, Cisco, Samsung and Netgear, and we would rather confirm a part against Huawei’s own documentation than sell you the wrong one, which on RTN 310 equipment is worth doing. Send us the platform, the subrack and the software release and we will come back with a straight answer.