PWR-C45-4200ACV

Model:PWR-C45-4200ACV Cisco Catalyst 4500 PoE Enabled Power Supply
Detail:Cisco Catalyst 4500 Power Supply PWR-C45-4200ACV Catalyst 4500 4200W AC dual input Power Supply (Data + PoE)
Guaranteed safe & secure checkout
Description
Reviews (0)
Q & A

Warranty: supplied with the Green Code 1-year standard hardware repair warranty. Any manufacturer warranty terms shown in the specifications below are the manufacturer’s own.

Cisco PWR-C45-4200ACV is a Catalyst 4500 4200W AC dual input Power Supply (Data + PoE). It belongs to the Catalyst 4500 PoE Enabled Power Supply range. Identify it by part number rather than appearance: parts in this class frequently look the same across generations that will not work in each other’s place.

Redundancy only works if they match. A pair of supplies has to be the same model and the same airflow direction, or the chassis will either refuse the second unit or run it in a way that defeats the point. Check the chassis generation first, since supplies with identical connectors are frequently not interchangeable, then the input type and the output rating against the full load.

How we supply it. Supplied new where available, otherwise as tested stock with warranty, subject to availability. Send us the host model along with the part number and we will check compatibility before you commit.

PWR-C45-4200ACV Specification

AC-input type

Autoranging input with power factor corrector

Note Power factor correction is a standard feature on all Catalyst 4500 E-series AC-input power supplies. PFC reduces the reactive component in the source AC current allowing higher power factors (typically 99 percent or better) and lower harmonic current components.

AC-input voltage

Low-line (120 VAC nominal)—85 VAC (min) to 132 VAC (max)

High-line (230 VAC nominal)—170 VAC (min) to 264 VAC (max)

AC-input current

12 A (maximum) @ 120 VAC or 230 VAC for each input

AC-input frequency

50/60 Hz (nominal) (±3% for full range)

Branch circuit requirement

Each chassis power supply should have its own dedicated, fused-branch circuit:

For North America—15 A or 20 A

For International—Circuits sized to local and national codes

All Catalyst 4500 E-series AC-input power supplies require single-phase source AC.

All AC power supply inputs are fully isolated.

– Source AC can be out of phase between multiple power supplies in the same chassis, which means that PS1 can be operating from phase A and PS2 can be operating from phase B.

– For high-line operation, the power supply operates with the hot conductor wired to a source AC phase and the neutral conductor wired either to ground or to another source AC phase as long as the net input voltage is in the range of 170 to 264 VAC.

– Source AC can be out of phase between AC inputs on power supplies that are equipped with multiple AC inputs, which means that power cord 1 can be plugged into phase A and power cord 2 can be plugged into phase B.

Power supply output capacity

The power supply output capacity is dependent on the number of AC power cords (1 or 2) attached, the source AC voltage (110 VAC [low-line] or 220 VAC [high-line] applied to the power supply inputs, and the number of power supply power switches switched on or off.

Note If source AC is applied to both two inputs, both inputs should have the same AC voltage.

1050 W operation

1050 W maximum with the following combinations of power cords and source AC voltage applied to the power supply inputs:

One AC input is connected to low-line (110 VAC nominal); the second AC input is not connected to source AC or is switched off.

2100 W operation

2100 W maximum with the following combinations of power cords and source AC voltage applied to the power supply inputs:

Both AC inputs are connected to low-line (110 VAC nominal) and both inputs are switched on.

One AC input connected to high-line (220 VAC nominal); the second AC input is not connected or is switched off.

4200 W operation

4200 W maximum with the following combinations of power cords and source AC voltage applied to the power supply inputs:

Both AC inputs are connected to high-line (220 VAC nominal) and both inputs are switched on.

Power supply output

1050 W operation (with one 110 VAC nominal input)

– 55.9 A @ 12 V (data only)

– 12.5 A @ 3.3 V (data only)

– 14.6 A @ –50 V (PoE if used)

2100 W operation (with two 110 VAC nominal inputs)

– 115.3 A @ 12 V (data only)

– 12.5 A @ 3.3 V (data only)

– 38.0 A @ –50 V (PoE if used)

2100 W operation (with one 220 VAC nominal input)

– 115.3 A @ 12 V (data only)

– 12.5 A @ 3.3 V (data only)

– 38.5 A @ –50 V (PoE if used)

4200 W operation (with two 220 VAC nominal inputs)

– 115.3 A @ 12 V (data only)

– 12.5 A @ 3.3 V (data only)

– 77.1 A @ –50 V (PoE if used)

Output holdup time

20 ms minimum

Maximum kVA rating

5.25 kVA

Max heat dissipation

3583 BTUs/hr.

Minimum software requirement

Cisco IOS Release 12.2(25)EWA

Power over Ethernet

Supported, up to 4200 W

LEDs and Meanings

LED

Color/State

Description

INPUT OK

 

Indicates whether the input voltage is within the required range:

 

Green

Input voltage is within the required range.

 

Flashing

Input voltage is present, but is below required range.

 

Off

Input voltage is below the required range or the power supply is off.

OUTPUT FAIL

 

 

 

Red

Output voltage is not within the specified range.

 

Off

Output voltage is within the specified range.

FAN OK

 

Indicates the status of the power supply fans:

 

Green

The fans are operational.

 

Off

The fans are not operational.

Reviews

There are no reviews yet

Be the first to review “PWR-C45-4200ACV”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
There are no questions yet
Why Choose Us

Trusted IT Hardware,
Delivered Right.

Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, worldwide delivery, and expert support.

Enterprise IT Solutions Partner

Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more.

UK & Worldwide Delivery

We deliver across the UK and export worldwide. Lead times vary by product and are confirmed at quotation.

100% Authentic Hardware

Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment.

Expert Technical Support

Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.

Competitive Pricing

We work to bring you the best enterprise IT hardware value without compromising on quality or warranty.

Sustainable IT Solutions

Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.

10,000+ Products Listed
50+ Countries Served
1-Year Standard Repair Warranty