
ODCM01001
| Model: | ODCM01001 – Huawei OSN 1800 Main Equipment |
| Detail: | Dispersion Compensation Module,1525~1568nm(compensate G.652 fiber),-170~-158ps/nm@1545nm(compensate 10km),=0.3ps,lc> |
Warranty: supplied with the Green Code 1-year standard hardware repair warranty. Any manufacturer warranty terms shown in the specifications below are the manufacturer’s own.
ODCM01001 is a Huawei dispersion compensation module for the OSN 1800, cut to compensate roughly 10 km of G.652 fibre.
What it is actually correcting. Different wavelengths travel through glass at slightly different speeds. A pulse of light is never a single wavelength, so over distance it spreads out until it starts to overlap the pulse behind it and the receiver can no longer tell them apart. That is chromatic dispersion, and it is why an optical span has a reach limit that has nothing to do with how much light arrives. This module winds the spreading back by passing the signal through a path with the opposite dispersion.
Its compensation is 170 to 158 ps/nm measured at 1545 nm, which is what 10 km of G.652 accumulates. That works out at roughly 16.4 ps/nm per kilometre, and it is worth seeing why that number differs so much between fibre types. Standard G.652 fibre runs around 17 ps/nm/km in the C-band, so a long span accumulates dispersion quickly. Fit a module cut for the wrong fibre type and you will either under-correct or over-correct, and over-correcting degrades the signal just as reliably as leaving it alone.
It is specified for G.652 fibre, which is standard single-mode and by far the most common fibre in the ground. If your span is dispersion-shifted or non-zero dispersion-shifted fibre, this is the wrong module. The fibre type is worth establishing from records or measurement rather than assumption, because it is not visible from the outside and a cable installed decades ago may not be what the current drawings claim.
It operates across 1525 to 1568 nm, which covers the C-band, so it compensates every DWDM channel passing through it rather than a selected one. Compensation is not perfectly flat across that window, so on a system using the full band the channels at the edges are corrected slightly differently from those in the middle. On a long, high-rate system that residual tilt is something the design has to account for.
Where the OSN 1800 stands today is better than the part number suggests. This is a current Huawei platform, not a legacy one. The OSN 9800 line was refreshed as recently as 2024 and Huawei still describes its newest member as a flagship WDM product, and the OSN 1800 is the metro counterpart in the same generation. A card for one of these is a card for a line that is still being developed rather than one being wound down.
The honest caveat is practical rather than commercial. Huawei does not publish end-of-support dates outside a logged-in support account, so nobody selling you this part, ourselves included, can quote you a hard support-end date. What can be said is that the platform is current and the part is not an orphan.
One UK rule worth knowing about, and who it actually binds. Under the UK’s Designated Vendor Direction, designated public telecoms providers, meaning the large operators running public networks, were required to stop using Huawei high data rate transmission equipment in their core networks from 31 December 2025, a date that has now passed, and must remove Huawei from their 5G networks entirely by 31 December 2027.
If you are one of those operators, that is the governing fact about this product and nothing here changes it. If you are not, and most buyers of transmission hardware are not, the Direction does not apply to you and there is no UK legal barrier to buying or running this equipment. It is narrowly scoped to designated providers and public networks. Worth stating plainly, because it gets quoted as though it were a blanket ban, and it is not.
What we need to get this right. The measured length of the span, the fibre type, and ideally the actual dispersion measurement rather than a calculation from distance, because splices and cable slack mean the optical length is always longer than the map. Tell us the span and what is at each end and we will work out the compensation it needs and whether it belongs in the line or between amplifier stages.
Green Code Technologies supplies Huawei optical transport equipment, including amplification, filtering and compensation. We are a supplier of Huawei alongside HPE, Dell, Cisco, Samsung and Netgear, and we would rather confirm a part against Huawei’s own documentation than sell you the wrong one, which on OSN 1800 equipment is worth doing. Send us the span, the fibre type, the channel plan and the levels at each end and we will come back with a straight answer.
ODCM01001 Specification
Dispersion Compensation Module,1525~1568nm(compensate G.652 fiber),-170~-158ps/nm@1545nm(compensate 10km),=0.3ps,lc>
Q & A
Trusted IT Hardware,
Delivered Right.
Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, worldwide delivery, and expert support.
Enterprise IT Solutions Partner
Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more.
UK & Worldwide Delivery
We deliver across the UK and export worldwide. Lead times vary by product and are confirmed at quotation.
100% Authentic Hardware
Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment.
Expert Technical Support
Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.
Competitive Pricing
We work to bring you the best enterprise IT hardware value without compromising on quality or warranty.
Sustainable IT Solutions
Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.


























Reviews
There are no reviews yet