HWIC-2SHDSL=

Model:HWIC-2SHDSL Cisco Router High-Speed WAN Interface card
Detail:2-pair G.SHDSL HWIC Cisco Router High-Speed WAN Interface card
Guaranteed safe & secure checkout
Description
Reviews (0)
Q & A

HWIC-2SHDSL= is a WAN interface card for Cisco routers: 2-pair G.SHDSL HWIC Cisco Router High-Speed WAN Interface card.

The three things that decide whether a card like this will work, in order of how often they are got wrong. First the chassis: a card seats mechanically in families it is not supported in, and on some platforms it will be recognised and then refuse to pass traffic. Second the software release, because card support is gated by release and a router held back on an older version will reject hardware that is otherwise perfectly compatible — the symptom looks like a hardware fault and is not one. Third the slot, because high-throughput cards often require specific slots with the fabric bandwidth to feed them, and the chassis will not tell you that until the card is in.

This is a G.SHDSL card, which makes it worth a word about the line itself. G.SHDSL is symmetric and was used for business circuits where the upstream mattered as much as the downstream. It is a technology on the way out across most of Europe as copper is retired.

Three questions worth answering before any router purchase, whatever the model. What the throughput requirement actually is with your feature set enabled, rather than the datasheet figure measured without it. Whether the features you need are licensed as well as present, since on most platforms security and performance are separate entitlements. And how many slots or ports you will need in three years, because adding capacity is cheap and replacing a chassis is not.

Tell us the chassis, the software release it is running and which slot you intend, and we will confirm this card is supported in that combination before you order. If you are buying it as a spare, the part number on the card already fitted is a better guide than the original order paperwork, which on a router that has been maintained for a few years has usually drifted.

Green Code Technologies is a supplier of Cisco, and we supply Huawei and Juniper networking alongside HPE, Dell, Samsung, Netgear, Ubiquiti and Asus. We would rather tell you a part is no longer supported, or that we need to check it, than take an order for something that will not do what you need.

General Information

Manufacturer:

Cisco

Product ID:

HWIC-2SHDSL

Product Description:

2-port G.shdsl HWIC

Product Type:

HWIC

Marketing Information

The HWIC-2SHDSL 2-Pair High-Speed WAN Interface Card provide G.SHDSL connectivity to a Wide Area Network.The 2-pair G.SHDSL HWICs supersede the existing G.SHDSL WAN Interface Card which is a WIC-based G.SHDSL solution.

Technical Information

Application/Usage:

Wide Area Network

Interfaces/Ports

Interfaces/Ports:

1 x RJ-11 G.SHDSL WAN

Media & Performance

Connectivity Media:

Copper G.SHDSL

Data Transfer Rate:

4.61 Mbps G.SHDSL

Management & Protocols

Digital Signaling Protocol:

SHDSL

Protocols & Specifications:

ITU G.991.2 (G.shdsl)

Environmental Conditions

Temperature:

32°F (0°C) to 104°F (40°C) Operating

-4°F (-20°C) to 149°F (65°C) Storage

Humidity:

10% to 90% Non-condensing Relative Humidity

Physical Characteristics

Dimensions:

0.7″ Height x 2.8″ Width x 4.0″ Depth

Weight (Approximate):

3.52 oz

Miscellaneous

Additional Information:

· Based on ITU Recommendation G.991.2

· Offers symmetrical WAN speeds of 2.304 Mbps per pair up to 9.2 Mbps over four pairs on the 4-pair by bonding with IMA Version 1.1

· Supports Wetting Current

· Sustains up to 8 permanent virtual circuits (PVCs) per HWIC

·Offers extensive ATM class-of-service (CoS) and IP quality-of-service (QoS) support

·The minimum Cisco IOS Software Release required for the G.SHDSL HWICs

Reviews

There are no reviews yet

Be the first to review “HWIC-2SHDSL=”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
There are no questions yet
Why Choose Us

Trusted IT Hardware,
Delivered Right.

Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, fast delivery, and expert support.

Enterprise IT Solutions Partner

Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more — sourced through authorised channels.

Fast UK & Global Delivery

Next-day delivery across the UK and rapid worldwide shipping. Orders placed before 2 PM are dispatched the same working day.

100% Authentic Hardware

Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment — no grey-market risk.

Expert Technical Support

Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.

Competitive Pricing

We source directly from authorised supply chains to bring you the best enterprise IT hardware value without compromising on quality or warranty.

Sustainable IT Solutions

Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.

10,000+ Products in Stock
50+ Countries Served
5,000+ Happy Customers
10+ Years Experience