EHWIC-4SHDSL-EA

Model: EHWIC-4SHDSL-EA Cisco 1900 Series Option & Spare
Detail: Cisco 1900 Series Option & Spare EHWIC-4SHDSL-EA
Guaranteed safe & secure checkout
Description
Reviews (0)
Q & A

Warranty: supplied with the Green Code 1-year standard hardware repair warranty. Any manufacturer warranty terms shown in the specifications below are the manufacturer’s own.

EHWIC-4SHDSL-EA is a WAN interface card for Cisco ISR G2 routers: cisco 1900 Series Option & Spare EHWIC-4SHDSL-EA.

The three things that decide whether a card like this will work, in order of how often they are got wrong. First the chassis: a card seats mechanically in families it is not supported in, and on some platforms it will be recognised and then refuse to pass traffic. Second the software release, because card support is gated by release and a router held back on an older version will reject hardware that is otherwise perfectly compatible — the symptom looks like a hardware fault and is not one. Third the slot, because high-throughput cards often require specific slots with the fabric bandwidth to feed them, and the chassis will not tell you that until the card is in.

This is a G.SHDSL card, which makes it worth a word about the line itself. G.SHDSL is symmetric and was used for business circuits where the upstream mattered as much as the downstream. It is a technology on the way out across most of Europe as copper is retired.

What this platform is for. The ISR G2 is a branch-office router from Cisco’s second Integrated Services generation, the workhorse of corporate branch networks for most of a decade. Knowing the family’s intended role is usually more useful than the part number when you are working out whether something fits: a chassis built for one job will do another, but rarely well, and the cost of that mismatch tends to show up as throughput or feature limits rather than as an outright failure.

Three questions worth answering before any router purchase, whatever the model. What the throughput requirement actually is with your feature set enabled, rather than the datasheet figure measured without it. Whether the features you need are licensed as well as present, since on most platforms security and performance are separate entitlements. And how many slots or ports you will need in three years, because adding capacity is cheap and replacing a chassis is not.

Where this sits: the ISR G2 generation has been superseded by the ISR 4000 series. Cisco’s own end-of-life notice for the 3900 series set the last day to order as 9 December 2017 and the last day of support as 31 December 2022, and directs customers to the ISR 4000 series, typically the 4431 or 4451, as the migration. The 1900 and 2900 followed the same path.

These routers are nonetheless still in service in very large numbers, which is why the part numbers still get searched for. If you are keeping one running, a spare is a reasonable purchase and we can source it. What you will not get is a software fix or vendor support, and that is the part worth weighing rather than the price.

Tell us the chassis, the software release it is running and which slot you intend, and we will confirm this card is supported in that combination before you order. If you are buying it as a spare, the part number on the card already fitted is a better guide than the original order paperwork, which on a router that has been maintained for a few years has usually drifted.

Green Code Technologies is a supplier of Cisco, and we supply Huawei and Juniper networking alongside HPE, Dell, Samsung, Netgear, Ubiquiti and Asus. We would rather tell you a part is no longer supported, or that we need to check it, than take an order for something that will not do what you need.

EHWIC-4SHDSL-EA Specifications

Type

Cisco Multimode Four-Pair G.SHDSL EHWIC

Chipset

Socrates-4e from Lantiq

Dimensions (H x W x D)

6.25 x 5.63 x 1.75 in. (15.88 x 14,30 x 4.45 cm)

Firmware version

IDC Firmware version: V1.7.2.0

DFE Firmware version: V-1.1.7.10_2 10

Weight

3 Lbs

System Requirements

Cisco, 1921, 1941, 2901, 2911, 2921, 2951, 3925, 3945, 3925e, and 3945e Router

LEDs

EN/LP

Status of the system:

Green: Operating system is running

Amber: Indicates loopback mode

EFM

Green: Indicates EFM mode

ATM

Green: Indicates ATM mode

L0, L1, L2, L3, L4, L5, L6, L7

Status of link:

Green on: Link is active

Off: Link is inactive or not configured

Amber: Link alarm

Blinking green: Link is training.

Slow blinking indicates IMA link

training

Fast blinking indicates non-IMA link

Is training

Amber and green blinking

Simultaneously: Loopback mode

EN/LP is also amber

Ports

RJ-45 connector

Cable

RJ-45

Network Equipment Building Standards (NEBS) compliance

No

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

Ask a question
There are no questions yet
Why Choose Us

Trusted IT Hardware,
Delivered Right.

Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, worldwide delivery, and expert support.

Enterprise IT Solutions Partner

Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more.

UK & Worldwide Delivery

We deliver across the UK and export worldwide. Lead times vary by product and are confirmed at quotation.

100% Authentic Hardware

Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment.

Expert Technical Support

Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.

Competitive Pricing

We work to bring you the best enterprise IT hardware value without compromising on quality or warranty.

Sustainable IT Solutions

Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.

10,000+ Products Listed
50+ Countries Served
1-Year Standard Repair Warranty