ASR-9010-DC-V2

‘

Model:ASR-9010-DC-V2 Cisco Router ASR 9010
Detail:Cisco ASR 9010 System ASR-9010-DC-V2 ASR 9010 DC Chassis with PEM Version 2
Guaranteed safe & secure checkout
Description
Reviews (0)
Q & A

Warranty: supplied with the Green Code 1-year standard hardware repair warranty. Any manufacturer warranty terms shown in the specifications below are the manufacturer’s own.

ASR-9010-DC-V2 is an enterprise Cisco router, from the ASR 9000 family: cisco ASR 9010 System ASR-9010-DC-V2 ASR 9010 DC Chassis with PEM Version 2.

What this platform is for. The ASR 9000 is a carrier-class aggregation router for provider edge and core duty, built around a large switching fabric and modular line cards. Knowing the family’s intended role is usually more useful than the part number when you are working out whether something fits: a chassis built for one job will do another, but rarely well, and the cost of that mismatch tends to show up as throughput or feature limits rather than as an outright failure.

Three questions worth answering before any router purchase, whatever the model. What the throughput requirement actually is with your feature set enabled, rather than the datasheet figure measured without it. Whether the features you need are licensed as well as present, since on most platforms security and performance are separate entitlements. And how many slots or ports you will need in three years, because adding capacity is cheap and replacing a chassis is not.

A point about end-of-life notices on a platform like this, because it causes real confusion. Cisco publishes these per part number, not per family. The ASR 9000 family is not retired, but individual line cards, route processors and software releases within it have their own notices, and some of them have passed. So “is the platform current?” and “is this specific card still supported?” are two different questions with potentially different answers.

That is why we check the exact part number rather than the family before quoting. Send us the code you are looking at and we will tell you where that specific item stands, not where the platform stands.

Tell us what the router has to do, the circuits it has to terminate, the throughput you are designing to and whether you need the security features licensed. We would rather size it from the requirement than from a part number, because the two commonest mistakes on a router purchase are buying throughput that turns out to need a licence and buying a chassis with no slots left.

Green Code Technologies is a supplier of Cisco, and we supply Huawei and Juniper networking alongside HPE, Dell, Samsung, Netgear, Ubiquiti and Asus. We would rather tell you a part is no longer supported, or that we need to check it, than take an order for something that will not do what you need.

ASR-9010-DC-V2 specifications

DescriptionCisco ASR 9010 System ASR-9010-DC-V2 ASR 9010 DC Chassis with PEM Version 2

Cisco ASR 9010 Specs

Physical specificationsHeight: 36.75 in. (933.45 mm) (21 RU)

Width: 17.38 in. (441.45 mm)

Depth:

●  With doors: 29.03 in. (737.4 mm)

●  Without doors: 28.24 in. (717.3 mm)

Weight:

●  155.6 lb (70.73 kg) (chassis with PEM)

231.6 lb (105.27 kg) (fully loaded, excluding linecards and power modules) – RSP, two v2 fan trays, PEMs

Slot orientationVertical
Cisco ASR 9000 Series RSPDual redundant RSPs with integrated fabric in 2 slots
Cisco ASR 9000 Series line cards8 line-card slots
“Commons” components2 RSPs

2 fan trays

2 PEMs (either DC or AC)

1 fan filter

Reliability and availabilityFabric redundancy

Fan redundancy

Feed redundancy

Power-supply redundancy

RSP redundancy

Software redundancy

Rack mounting19-in. default

21- and 23-in. adapters available

Note: Minimum 17.75-in. opening between posts is needed for proper operation

Cabinet mountingYes

Note: Doors not recommended in enclosed cabinets

Wall mountingNo
AirflowFront-to-back

Performance

FabricOne per RSP:

●  Active/active nonblocking operation mode in dual-RSP redundant configuration

●  Fully redundant in dual-RSP redundant configuration

●  Built-in service-intelligence and traffic-prioritization capability

ThermalTwo fan trays:

●  12 high-efficiency fans per tray

●  Variable-speed fans for optimal thermal performance

●  No single point of failure

ModularityPay-as-you-grow power for future scalability, available in AC and DC.

Multiple power module types:

●  6 kW and 3 kW AC power modules

●  4.4 kW and 2.1 kW DC power modules

Note: Mixing of AC and DC modules is not supported

Redundancy●  AC: N+N redundancy

●  DC: N+1 redundancy

●  Power module redundancy

●  A/B Feed redundancy

●  PEM redundancy

Power zonesNo power zone restrictions

Fully load-sharing power infrastructure

Power inputWorldwide ranging AC (200-240V; 50-60 Hz; 16A maximum)

Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum)

Power-module airflowFront-to-back

Environmental Specifications

Operating temperature (nominal)41 to 104ºF (5 to 40ºC)
Operating temperature (short-term)ASR 9006: 23 to 131ºF (-5 to 55ºC)

ASR 9010: 23 to 122ºF (-5 to 50ºC)

Operating humidity (nominal) (relative humidity)5 to 90%
Storage temperature-40 to 158ºF (-40 to 70ºC)
Storage (relative humidity)5 to 93%
Operating altitude-60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Regulatory Compliance

Network Equipment Building Standards (NEBS)Cisco ASR 9010 Routers are designed to meet:

●  SR-3580: NEBS Criteria Levels (Level 3)

●  GR-1089-CORE: NEBS EMC and Safety

●  GR-63-CORE: NEBS Physical Protection

●  VZ.TPR.9205: Verizon TEEER

ETSI standardsCisco ASR 9010 Routers are designed to meet:

●  EN300 386: Telecommunications Network Equipment (EMC)

●  ETSI 300 019 Storage Class 1.1

●  ETSI 300 019 Transportation Class 2.3

●  ETSI 300 019 Stationary Use Class 3.1

EMC standards emissionCisco ASR 9010 Routers are designed to meet:

●  FCC Class 47CFR15 A

●  ICES 003 Class A

●  AS/NZS CISRP22 Class A

●  CISPR 22 (EN55022) Class A

●  VCCI Class A

●  BSMI Class A

●  IEC/EN 61000-3-12: Power Line Harmonics

●  IEC/EN 61000-3-11: Voltage Fluctuations and Flicker

●  EN55022: Information Technology Equipment (Emissions)

●  EN 50121-4: Railway EMC

EMC standards immunityCisco ASR 9010 Routers are designed to meet:

●  IEC/EN-61000-4-2: Electrostatic Discharge Immunity (8kV Contact, 15kV Air)

●  IEC/EN-61000-4-3: Radiated Immunity (10V/m)

●  IEC/EN-61000-4-4: Electrical Fast Transient Immunity (2kV Power, 1kV Signal)

●  IEC/EN-61000-4-5: Surge AC Port (4kV CM, 2kV DM)

●  IEC/EN-61000-4-5: Signal Surge Ports (1kV)

●  IEC/EN-61000-4-5: Surge DC Port (1kV CM, 1kV DM)

●  IEC/EN-61000-4-6: Immunity to Conducted Disturbances (10Vrms)

●  IEC/EN-61000-4-8: Power Frequency Magnetic Field Immunity (30A/m)

●  IEC/EN-61000-4-11: Voltage DIPS, Short Interruptions, and Voltage Variations

●  EN55024: Information Technology Equipment (Immunity)

●  EN50082-1/EN-61000-6-1: Generic Immunity Standard

●  EN 50121-4: Railway EMC

SafetyCisco ASR 9010 Routers are designed to meet:

●  UL/CSA/IEC/EN 60950-1

●  IEC/EN 60825 Laser Safety

●  ACA TS001

●  AS/NZS 60950

●  FDA Code of Federal Regulations Laser Safety

Reviews

There are no reviews yet

Be the first to review “ASR-9010-DC-V2”

Your email address will not be published. Required fields are marked *

Q & A

Ask a question
There are no questions yet
Why Choose Us

Trusted IT Hardware,
Delivered Right.

Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, worldwide delivery, and expert support.

Enterprise IT Solutions Partner

Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more.

UK & Worldwide Delivery

We deliver across the UK and export worldwide. Lead times vary by product and are confirmed at quotation.

100% Authentic Hardware

Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment.

Expert Technical Support

Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.

Competitive Pricing

We work to bring you the best enterprise IT hardware value without compromising on quality or warranty.

Sustainable IT Solutions

Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.

10,000+ Products Listed
50+ Countries Served
1-Year Standard Repair Warranty