CE6851-48S6Q-HI-B
| Model: | Huawei CE6851-48S6Q-HI Switch(48-Port 10G SFP+,6-Port 40GE QSFP+,2*FAN Box,Port-side Intake,Without Power Module) |
Huawei CE6851-48S6Q-HI-B is a CE6851-48S6Q-HI Switch (48-Port 10G SFP+, 6-Port 40GE QSFP+, 2x FAN Box, Port-side Intake, Without Power Module). The part number is the reliable way to identify it, because accessories of this kind are often visually identical across generations that are not interchangeable.
Redundancy only works if they match. A pair of supplies has to be the same model and the same airflow direction, or the chassis will either refuse the second unit or run it in a way that defeats the point. Check the chassis generation first, since supplies with identical connectors are frequently not interchangeable, then the input type and the output rating against the full load.
How we supply it. Supplied new where available, otherwise as tested stock with warranty, subject to availability. Tell us the chassis or model it has to work with and we will confirm the part before anything ships. Quotes go out the same or next working day.
CE6851-48S6Q-HI-B Specifications | |
10G Base-T Ports | 0 |
SFP+ Ports | 48 |
FC Ports | 0 |
QSFP+ Ports | 6 |
Switching Capacity | 1.44 Tbit/s |
Forwarding Rate | 1,080 Mpps |
Airflow Design | Front-to-back or back-to-front |
Device Virtualization | iStack |
Super Virtual Fabric (SVF) | |
Network Virtualization | M-LAG |
TRILL | |
VM Awareness | Agile Controller |
Network Convergence | FCoE |
DCBX, PFC, and ETS | |
Programmability | OpenFlow |
OPS | |
Puppet, and OVSDB plugins released on open source websites | |
Linux container for open source and customization programming | |
Traffic Analysis | NetStream |
sFlow | |
VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN | |
QinQ | |
MUX VLAN | |
GVRP | |
ACL | Ingress: 3,750 Egress: 1,000 |
MAC Address Table | Maximum: 288k |
Dynamic learning and aging of MAC addresses | |
Static, dynamic, and blackhole MAC address entries | |
Packet filtering based on source MAC addresses | |
MAC address limiting based on ports and VLANs | |
ARP (maximum) | 128k |
IPv4 FIB (maximum) | 256k |
IP Routing | IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ | |
IPv6 FIB (maximum) | 128k |
IPv6 | IPv6 Neighbor Discovery (ND) |
Path MTU Discovery (PMTU) | |
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 | |
Multicast FIB (maximum) | 8k |
Multicast | IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
IGMP snooping | |
IGMP proxy | |
Fast leave of multicast member interfaces | |
Multicast traffic suppression | |
Multicast VLAN | |
Reliability | LACP |
STP, RSTP, VBST, and MSTP | |
BPDU protection, root protection, and loop protection | |
Smart Link and multi-instance | |
DLDP | |
ERPS (G.8032) | |
VRRP, VRRP load balancing, and BFD for VRRP | |
BFD for BGP/IS-IS/OSPF/Static route | |
QoS | Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-marking, and scheduling | |
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR | |
Congestion avoidance mechanisms, including WRED and tail drop | |
Traffic shaping | |
Configuration and Maintenance | Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 | |
File upload and download through FTP and TFTP | |
BootROM upgrade and remote upgrade | |
802.3az Energy Efficient Ethernet (EEE) | |
Hot patches | |
User operation logs | |
ZTP | |
Security and Management | 802.1x authentication |
Command line authority control based on user levels, preventing unauthorized users from using commands | |
DoS, ARP, and ICMP attack defenses | |
Port isolation, port security, and sticky MAC | |
Binding of the IP address, MAC address, interface number, and VLAN ID | |
Authentication methods, including AAA, RADIUS, and HWTACACS | |
Remote Network Monitoring (RMON) | |
Dimensions (W x D x H) | 442 mm x 420 mm x 43.6 mm |
Weight (fully loaded) | 8.7 kg (19.2 lb) |
Environmental Parameters | Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
Operating Voltage | AC: 90V to 290V |
Max. Power Consumption | 245W |
Q & A
Related Products
Trusted IT Hardware,
Delivered Right.
Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, fast delivery, and expert support.
Enterprise IT Solutions Partner
Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more — sourced through authorised channels.
Fast UK & Global Delivery
Next-day delivery across the UK and rapid worldwide shipping. Orders placed before 2 PM are dispatched the same working day.
100% Authentic Hardware
Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment — no grey-market risk.
Expert Technical Support
Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.
Competitive Pricing
We source directly from authorised supply chains to bring you the best enterprise IT hardware value without compromising on quality or warranty.
Sustainable IT Solutions
Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.
