A9K-SIP-700

‘

Model: A9K-SIP-700 Cisco ASR 9000 Series SPA Interface
Detail: Cisco ASR 9000 Interface A9K-SIP-700 Cisco ASR 9000 Series SPA Interface Processor-700
Guaranteed safe & secure checkout
Description
Reviews (0)
Q & A

Warranty: supplied with the Green Code 1-year standard hardware repair warranty. Any manufacturer warranty terms shown in the specifications below are the manufacturer’s own.

A9K-SIP-700 is a shared port adapter for Cisco ASR 9000 routers: cisco ASR 9000 Interface A9K-SIP-700 Cisco ASR 9000 Series SPA Interface Processor-700.

The three things that decide whether a card like this will work, in order of how often they are got wrong. First the chassis: a card seats mechanically in families it is not supported in, and on some platforms it will be recognised and then refuse to pass traffic. Second the software release, because card support is gated by release and a router held back on an older version will reject hardware that is otherwise perfectly compatible — the symptom looks like a hardware fault and is not one. Third the slot, because high-throughput cards often require specific slots with the fabric bandwidth to feed them, and the chassis will not tell you that until the card is in.

What this platform is for. The ASR 9000 is a carrier-class aggregation router for provider edge and core duty, built around a large switching fabric and modular line cards. Knowing the family’s intended role is usually more useful than the part number when you are working out whether something fits: a chassis built for one job will do another, but rarely well, and the cost of that mismatch tends to show up as throughput or feature limits rather than as an outright failure.

Three questions worth answering before any router purchase, whatever the model. What the throughput requirement actually is with your feature set enabled, rather than the datasheet figure measured without it. Whether the features you need are licensed as well as present, since on most platforms security and performance are separate entitlements. And how many slots or ports you will need in three years, because adding capacity is cheap and replacing a chassis is not.

A point about end-of-life notices on a platform like this, because it causes real confusion. Cisco publishes these per part number, not per family. The ASR 9000 family is not retired, but individual line cards, route processors and software releases within it have their own notices, and some of them have passed. So “is the platform current?” and “is this specific card still supported?” are two different questions with potentially different answers.

That is why we check the exact part number rather than the family before quoting. Send us the code you are looking at and we will tell you where that specific item stands, not where the platform stands.

Tell us the chassis, the software release it is running and which slot you intend, and we will confirm this card is supported in that combination before you order. If you are buying it as a spare, the part number on the card already fitted is a better guide than the original order paperwork, which on a router that has been maintained for a few years has usually drifted.

Green Code Technologies is a supplier of Cisco, and we supply Huawei and Juniper networking alongside HPE, Dell, Samsung, Netgear, Ubiquiti and Asus. We would rather tell you a part is no longer supported, or that we need to check it, than take an order for something that will not do what you need.

A9K-SIP-700 Specifications

Chassis compatibility All Cisco ASR 9000 Series chassis
Software compatibility Cisco IOS XR Software Release 3.9 or later
Density Up to 4 single-height SPAs or

Up to 2 double-height SPAs or

A combination of the two – subject to above restrictions

Interface Capabilities A9K-SIP-700 supports following SPA interface types:

· CHT1/E1

· CT3/DS0

· T3/E3

· OC3 / STM1

· ChOC3 / ChSTM1

· OC12 / STM4

· ChOC12 / ChSTM4

· OC48 / STM16

· ChOC48 / ChSTM16

· OC192 / STM64

Routing and Service capabilities IPv4 and IPv6 Routing. Some of the supported features include:

· BGP

· Intermediate System-to-Intermediate System (IS-IS)

· Open Shortest Path First (OSPF)

· Route Policy Language (RPL)

· BGP Prefix Independent Convergence (PIC)

· Multiprotocol Label Switching (MPLS)

· Multicast Virtual Private Network (MVPN)

· IPv6 Provider Edge (6PE)

· IPv6 Virtual Private Network to Provider Edge (6vPE)

· Traffic Engineering Fast Re-Route (TE-FRR), and Layer 3 VPN (L3VPN) services

· Packet over SONET

· Packet over SDH

· Frame Relay Point-to-Point Protocol (PPP)

· High-Level Data Link Control (HDLC)

· Multilink Point-to-Point Protocol (MLPPP)

· Multilink Frame Relay (MLFR)

· Link Fragmentation and Interleaving (LFI)

· Internet Protocol Header Compression (IPHC)

· Link Noise Monitoring (LNM), Any Transport over MPLS (AToM)

· Full Netflow

Synchronization Derives and provides synchronization to and from SONET/SDH interfaces. Interworks with Synchronous Ethernet (SyncE) support on the Ethernet interfaces and network synchronization interfaces on the Cisco ASR 9000 Route Switch Processor (RSP).
Reliability and high availability – Online Insertion and Removal (OIR) without affecting system traffic

– Multi-Router Automatic Protection Service (MR-APS) is a Cisco developed feature that provides protection against various hardware and software faults, including catastrophic system failure. MR-APS builds on the Telcordia Technologies -defined APS standard by adding Protect Group Protocol (PGP) communication between redundant routers. The SONET APS signaling and the PGP communication convey system state and SONET link state information between the Working and Protect routers. Upon failure of the network links or one of the routers, a backup path is available to prevent loss of service.

– Inter-Chassis Stateful Switchover (IC-SSO) for PPP consists of a collection of Cisco IOS XR Software subfeatures that provide switchover of PPP sessions to a backup router in the event of network or router failure. The feature integrates the MR-APS, IP Fast Reroute (FRR), and Simple Server Redundancy Protocol (SSRP) features to provide fast switchover of PPP data traffic.

– Bi-directional Forwarding Detection (BFD) provides rapid failure detection times between forwarding engines, while maintaining low overhead. It also provides a single, standardized method of link/device/protocol failure detection at any protocol layer and over any media.

Manageability – Cisco IOS XR Software includes industry-standard management interfaces, including modular command-line interface (CLI), Simple Network Management Protocol (SNMP), and native XML interfaces.

– Cisco Active Network Abstraction (ANA) is a flexible, vendor-neutral management framework for a multi-technology, multiservice network environment. Operating between the network and the operations-support-system (OSS) layer, Cisco ANA aggregates virtual network elements (VNEs) into a software-based virtual network, much as real network elements create the real-world network. Cisco ANA dynamically discovers network components and tracks the status of network elements in near real time.

– Cisco ANA offers service providers:

· Simplified integration of OSS applications with network information

· A flexible common infrastructure for managing network resources

· Consistent procedures and interfaces for all network elements

MIBs Support for a large number of hardware and product-specific as well as software feature MIBs; following is a partial list of MIBs supported:

– ENTITY-MIB,

– CISCO-ENTITY-SENSOR-MIB

– CISCO-ENTITY-ASSET-MIB

– CISCO-ENTITY-FRU-CONTROL-MIB.

– IF-MIB, DS1-MIB

– SONET-MIB

– CISCO-SONET-MIB

– BFD-MIB

Physical dimensions (H x W x D); weight 14 x 1.72 x 20.5 in.; 14 lb
Power 375W (maximum)
Operating temperature (nominal) 41 to 104ºF (5 to 40ºC)
Operating temperature (short-term)

23 to 131ºF (–5 to 55ºC)
Operating humidity (nominal) (relative humidity) 10 to 85%
Storage temperature –40 to 158ºF (–40 to 70ºC)
Storage (relative humidity) 5 to 95%

Note: Not to exceed 0.024 kg water per kg of dry air

Operating altitude –60 to 4000m (up to 2000m conforms to IEC, EN, UL, and CSA 60950 requirements)

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

Ask a question
There are no questions yet
Why Choose Us

Trusted IT Hardware,
Delivered Right.

Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, worldwide delivery, and expert support.

Enterprise IT Solutions Partner

Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more.

UK & Worldwide Delivery

We deliver across the UK and export worldwide. Lead times vary by product and are confirmed at quotation.

100% Authentic Hardware

Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment.

Expert Technical Support

Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.

Competitive Pricing

We work to bring you the best enterprise IT hardware value without compromising on quality or warranty.

Sustainable IT Solutions

Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.

10,000+ Products Listed
50+ Countries Served
1-Year Standard Repair Warranty

More from Cisco Router ASR 9000

View All Cisco Router ASR 9000
A9K-LI-LIC
A9K-LI-LIC
on backorder
SKU: A9K-LI-LIC
A9K-MOD80-AIP-TR
A9K-MOD80-AIP-TR
on backorder
SKU: A9K-MOD80-AIP-TR
A9K-8T/4-E
A9K-8T/4-E
on backorder
SKU: A9K-8T/4-E
A9K-3KW-AC
A9K-3KW-AC
on backorder
SKU: A9K-3KW-AC