FAP-421E
| Model: | FAP-421E – Fortinet FortiAP Access Points |
| Detail: | Indoor Wireless AP — 2x GE RJ45 ports, 802.11 a/b/g/n/ac Wave 2, dual radio (2.4 GHz/5 GHz), 4×4 MU-MIMO, ceiling/wall mount kit included, power adapter not included. For Gigabit PoE injector order: GPI-130. |
Delivery & Return
We want you to be happy with your purchase and we apologize if it is not. For whatever reason that you are not satisfied, we would be most happy to provide exchanges and returns for all items purchased from us if the following conditions are met.
Rules
For delivery and returns information, please review our Return & Refund Policy or contact our team before ordering. Eligibility and time limits depend on the product condition, order type, manufacturer terms, and the terms agreed in your quotation.
Interpretation and Definitions
For delivery and returns information, please review our Return & Refund Policy or contact our team before ordering. Eligibility and time limits depend on the product condition, order type, manufacturer terms, and the terms agreed in your quotation.
Accessories from hundreds of brands
FAP-421E Specification | |
Hardware | |
Hardware Type | Indoor AP |
Number of Radios | 2 |
Number of Antennas | 8 Internal |
Antenna Type and Peak Gain | PIFA: 4 dBi for 2.4 GHz, 5 dBi for 5 GHz |
Frequency Bands (GHz)* | 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities | 2.4 GHz b/g/n (4×4:4 stream) 20/40 MHz (256 QAM) |
Radio 2 Capabilities | 5 GHz a/n/ac (4×4:4 stream) 20/40/80 MHz (256 QAM) |
Maximum Data Rate | Radio 1: up to 800 Mbps Radio 2: up to 1,733 Mbps |
Bluetooth Low Energy (BT/BLE) Radio | |
Interfaces | 2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) | Dual redundant PoE power ports with support for IEEE 802.3at (2×2 operation with 802.3af) |
Simultaneous SSIDs | Up to 16 (14 if background scanning enabled) |
EAP Type(s) | EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication | WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power | 2.4 GHz: 24 dBm / 251 mW (4 chains combined)* 5 GHz: 25 dBm / 316 mW (4 chains combined)* |
Kensington Lock | Yes |
IEEE Standards | 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az |
SSID Types Supported | Local-Bridge, Tunnel, Mesh |
Per Radio Client Capacity | Up to 512 |
Cellular Co-existence | No |
LED Off Mode | Yes |
Advanced 802.11 Features | |
802.11ac MU-MIMO Wave 2 | Yes |
Transmit Beam Forming (TxBF) | Yes |
Low-Density Parity Check (LDPC) Encoding | Yes |
Maximum Likelihood Demodulation (MLD) | Yes |
Maximum Ratio Combining (MRC) | Yes |
A-MPDU and A-MSDU Packet Aggregation | Yes |
MIMO Power Save | Yes |
Short Guard Interval | Yes |
Wireless Monitoring Capabilities | |
Rogue Scan Radio Modes | Background, Full-time |
WIPS / WIDS Radio Modes | Background, Full-time |
Packet Sniffer Mode | Yes |
Spectrum Analyzer | Yes |
Dimensions | |
Length x Width x Height | 8.5 x 8.5 x 2.2 inches (215 x 215 x 56 mm) |
Mounting Options | Ceiling, T-Rail, and Wall |
Included Accessories | Mount kits for Ceiling, T-Rail, and Wall |
Environment | |
Power Supply | SP-FAP400-PA-XX, GPI-115, or GPI-130 |
Power Consumption (Max.) | 23 W max power draw in 802.3at mode and 12.95 W max power draw when in 802.3af power mode (operates in 2×2 mode) |
Humidity | 5–90% non-condensing |
Operating / Storage Temperature | -4–122°F (-20–50°C) / -40–158°F (-40–70°C) |
Directives | Low Voltage Directive • RoHS |
UL2043 Plenum Material | Yes |
Mean Time Between Failures | >30 Years |
IP Rating | |
Surge Protection Built In | |
Hit-less PoE Failover | Yes |
Certifications | |
Wi-Fi Alliance Certified | Yes |
DFS | FCC, IC, CE, Japan, Taiwan, Korea |
Warranty | |
Limited Lifetime Warranty | Yes |
*Frequency selection and power may be restricted to abide by regional regulatory compliance laws. | |
Q & A
Related Products
Trusted IT Hardware,
Delivered Right.
Green Code Technologies is a UK-based IT hardware supplier trusted by businesses across 50+ countries — for genuine equipment, fast delivery, and expert support.
Enterprise IT Solutions Partner
Genuine, warranty-backed hardware from leading brands including Cisco, Huawei, HPE, Dell, Fortinet and more — sourced through authorised channels.
Fast UK & Global Delivery
Next-day delivery across the UK and rapid worldwide shipping. Orders placed before 2 PM are dispatched the same working day.
100% Authentic Hardware
Every product is verified for authenticity with verifiable serial numbers. We supply only genuine and certified equipment — no grey-market risk.
Expert Technical Support
Our in-house engineers provide free pre-sales and post-sales support to help you choose the right product for your infrastructure.
Competitive Pricing
We source directly from authorised supply chains to bring you the best enterprise IT hardware value without compromising on quality or warranty.
Sustainable IT Solutions
Sustainability is at our core. We offer eco-friendly certified-refurbished options alongside new hardware to reduce your organisation's carbon footprint.
Reviews
There are no reviews yet